US Car Body Dent Puller Hammer Tool Paintless Hail Damage Remover Repair Kit

Description

Car Body Dent Puller Hammer Tool Paintless Hail Damage Remover Repair Kit
Description:
Professional Paintless Dent Removel Repair Tools Kits;Perfect for Car Body hail damge dent and door ding repair removal,Save your money and time to go the repair shop.
Easy To Control-DIY can removal the dent by yourself,Suitable for any person to operate,It has the advantages of simple operation,repair the dent for you directly
Durability and reuse, Car dent puller kits are made of the stainless steel, not easy to rust, the hard rubber material tabs are durable to reuse, both could use a long time, also environment friendly.
The golden dent lifter with a unique can adjust Width and height . you can adjust the fixed position and distance for your different size dents, efficiently and labor-saving.
Can Be Widey Use-Our PDR Tool is suitable for the sheet metal processing of automobile,refrigerator,and washing machine,etc.
No residual glue: Clean car dents first. The heating time of the glue gun is 3-5 minutes.
Package
1#
1*T Bar Tools
18* Glue Pulling Tabs
2#
1*Glue Gun
10* Glue Sticks
1*Glue Removal Scrapper
3#
4 * Blue Label
2 * Brackets
4#
1 * Double Pole Bridge Dent Puller
8 * Black Puller Tab
5#
1 *  Dent Lifter(No adhesive pads)
18 * Car Dent Repair Tabs  Print Tabs With different style
How to use:
Clean the dent with a clean wet cloth;
Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
Choice the proper drawing gasket, you have 18 sizes gasket, Large dent requires a large drawing gasket.
Pull the trigger and apply the drawing gasket with extruded glue.
Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter);
While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent;
Check with a Line board. If dent still exists, knock it slightly with a knockdown tool.
Use alcohol and plastic shovel to clean up the residual glue.