PDR Car Paintless Dent Repair Puller Remover Lifter Dint Hail Damage Full Kits

Description

Product Description
Package:
----10pc Spring Steel Rods (5pc Black + 5pc Blue)
----1pc Slide Hammer T Bar
----1pc Dent Puller Lifter
----1pc LED line Board
----1pc Glue Gun
----6pc Glue Sticks
----1pc Tap down Hammer
----1pc dent ding hammer
----1pc Mental Tap Down Pen w/ 4pc Heads
----1pc Puller Bridge w/ 5pc tabs
----1pc Mini Red T bar
----54pc Puller Tabs
----1pc Shovel
----1pc Bottle (empty)
----1pc PDR Bag
Why dent lifter?
-Dent lifter is quite easy to operate, no complicated guidance needed.
-Capable of repairing small/mid-sized dent with width-adjustable base.
-Deals with most dents with an affordable cost.
-Can be used repeatedly with extra glue pulling tabs provided in this kit.
Basic Steps of Paintless Dent Repair
1. Mark the dent with with marking pen.
2. lnsert the glue stick into the glue gun and heat the stick for 3-5 minutes.
3. Apply the melted glue on the tab, remember to start from the center of tab and make sure the glue is even and full.
4. Align the tab with the center of the dent and slightly press the tab for 3-5 minutes until it cools down and the tab is fixed on the dent.
5. Choose different tools for different types of dents and follow corresponding step:
-Dent Lifter: Buckle the lifter till it is fastened, hold the handle gradually to pull the dent, repeat several times till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
-Bridge Puller: Put the screw part of the tab through the hole in the middle of the bridge. Install the nut and screw it carefully till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
6. If the result is not so ideal, use hammer and tap-down-pen to improve the result slowly, the tap-down-pen has replaceable tips, for beginners we the flat one will be recommended.
7. Remove the glue tabs and glue with scraper, if they are hard to remove, spray some alcohol first and then try again.
High success rate
Super PDR dent repait kit provides higher success rate compared to others, that's the result of the premium quality and unique design of Super PDR.
Wide application
The PDR kit removes not only dent on cars, but also on refrigerator, washing machine etc. And the glue gun and sitcks can be widely used in handworks, DIY projects and home repair.
Comprehensive kit
Beside the dent pullers, the kit also contains hammers and leveling pen with replaceable tips, to that you could keep improving the repair result until it's perfect.