12PC Car Body Dent Puller Glue Gun Tool Paintless Hail Damage Remover Repair Kit

Description

12pcs Car Body Dent Puller Glue Gun Tool Damage Remover Repair Kit w/ 10x Sticks
Product View
Details
Common problems:
1.
Insufficient heating of glue
Fully heat for 5-7 minutes, until there is liquid from the muzzle or press the switch lightly, the glue will be released
2.
The glue is too little and too thin on the gasket
It needs to be even and thick, and you can apply a little more in the middle, and quickly stick to the recessed area after applying
3.
Wrong pulling direction
When pulling, it should be as vertical as possible to the body
4.
Too much pulling force
Should be uniform and moderate, repeat the operation many times
5.
Too much force to stick the suction cup
Too much force will easily squeeze the glue to the outside, you should press gently for 2-3 seconds
6.
Pull time issues
After the suction cup is attached, pull it when the glue cools down and there is residual temperature. The temperature of the sol is too high or it is completely cooled before pulling it, it will easily fall
7.
The suction cup is very easy to fall off because of floating dust or water on the surface
The sunken area should be washed with water and dried with a towel
8.
The car body temperature is too high in summer
Use cold water to cool the recessed area first, and then dry the water
9.
The car body temperature is too low in winter
First heat the recessed area with hot water, and then dry the water
10.
sucker size problem
The larger the suction cup, the greater the suction power, which is suitable for the flat and concave area
Important:
Due to the difference in the heating time of the adhesive strip and the thickness of the application, it may fall off in one operation, so you need to be patient and repeat the operation several times! ! You can also experiment with other things to determine whether the glue is sticky! !
Is the residual glue not clean?
1. Use high-concentration alcohol to clean up with a spatula while spraying (diesel, gasoline and asphalt can also be tried)
2. Use a hot air blower to heat the glue, and then clean it with a spatula
3. Use hot water above 80 degrees Celsius to clean up with a spatula while pouring it
4. The alcohol bottle is empty, it should be a transportation restriction, sorry about that
How to repair the dent on your car with dent puller set?
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a ‘pea’ sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
10. The T-Hand Puller may be used for larger dents or to remove the last 10-20% of a dent.
11. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
12. Spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper.
13. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
This hot melt glue gun super strong adhesive is ideal for crafts, floral, plastic, glass, ceramic, rubber, leather and many other DIY projects. High quality EVA glue sticks for better bonding to metals, plastic and ceramic items.
Specification:
Power: 100W
Preheat time: 3 minutes
Voltage: 110V
Cable length: 2m
Glue Sticks: 10mm Dia. x 270mm Length
Package Included:
1x 110V Blue Glue Gun
10x Sticks
1x Plastic Shovel
Shipping Policy
Payment Method
Returns Policy
Contact us
Shipping Policy
Once we have received cleared full payment, your items will be dispatched in
1-2
working days.
Please make sure shipping
address
is correct upon placing your order as we will only ship to the PayPal address.
For US buyers, Usually we use USPS, sometimes Fedex Ups and other Excellent Service is used. All packages are added with tracking number.
The item will be shipped directly from the Duarte, California, Or from other states (nearest shipping) United States.
We try our best to give customers' good buying experience. Hope we can deal with soon and let us witness this moment.
Payment Method
1
. After Auction Close, You can Go ahead and Checkout with Ebay System, We Do not Offer Combine shipping Payment (if you want to purchase multiple quantities, please contact us and we will give you a discount price).
2
. We accept Paypal only.
3
. We only ship to your Paypal's address, please ensure that the shipping address and phone number on your paypal profile is correct. If you have any change for address, please inform us in paypal note or send an email before shipping.
4
. Payment must be fulfilled within 7 days since auction's ending. All non-paying bidders will receive an unpaid reminder from eBay.
Returns Policy
If any item is defective upon receipt or do not work, please contact us for the return address, return is accepted
within 30 days
after the buyer receiving the item.
Returned item has to be in its original condition. Buyer is responsible for return shipping costs . After receiving the return we will make a replacement depends on our available stock, if not available, a refund will be issued.
Contact us
If you have any questions, then kindly please contact us via the
‘
Ask a question
’ Tab which is located on the bottom of the listing page.
Thank you for shopping with us and we hope to see you soon!
Home
Payment
Shipping
About us
Contact us
Copyright@2016 All rights reserved
On Oct 21, 2022 at 01:24:18 PDT, seller added the following information: